Product Description

This resin upper barbell storage was developed and manufactured by Toriitsu Denzai, a company specializing in resin processing.
This is a new type of barbell storage that is installed on the top of a pillar, so it can be installed without having to worry about ceiling height like vertical storage.
Ideal for storing barbells in private or home gyms, it is made of high-strength MC nylon resin and will not damage the knurling or coating of the barbell.

It is designed exclusively for MBC's original rack specifications of 75 mm diameter and 3 mm thick frame.

*It may be possible to use racks made by other manufacturers, but we cannot guarantee that they will work.

specification

• Material : MC nylon resin (precision machined)
• Weight : Sold as a pair
• Barbell groove width : 31mm
• Country of Manufacture : Japan
• Other : Free shipping

Installation Method

1. What you will need : A rubber hammer and a stepladder or footstool.
   *As you will be working at a height, please be careful not to fall.
2. Removing the plastic cover : Remove the cover from the top of the support using a flat head screwdriver.
3. Loosen the bolts : Loosen the bolts near the installation area to prevent deformation of the support (retighten after installation).
4. Attach with a rubber mallet : Slide it in vertically bit by bit.
5. Check : After installation, check that there is no wobble or looseness.

Usage notes

• When storing the barbell, make sure the shaft is completely inserted into the groove to prevent it from falling.
• Barbells with a shaft diameter exceeding 30mm cannot be stored.

Use for chinning

• It is made of high-strength resin, so it is fine for simple hanging, but we do not recommend using it for serious chin-ups .
• Do not perform pull-ups with momentum as this can cause serious injury.
• Before use, check that the mounting parts are not loose or the resin is not damaged.