A weight stack type lat pulldown/low row attachment that can be mounted on an MBC original rack. This attachment is exclusively for the MBC Half Rack Standard 210cm (Type 1, 1.5, 2) and MBC Power Rack Standard 210cm (Type 1, 2, 3, 4).
specification
*Detailed specifications may be changed without notice.
Plate mounting part : diameter 50mm, total length 30cm
Frame color : Black (powder coated)
Country of Origin : China
Shipping
Free shipping: **Hokkaido and Okinawa; 9,900 yen
This product will be delivered by Seino Transportation. Delivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building. Deliveries to condominiums, buildings, and apartment buildings will generally be made at the first floor entrance. In addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office. If you purchase other products at the same time, they may be delivered separately from this product by Yamato Transport, Japan Post, Sagawa Express, etc.
[Shipping size and packaging weight] MBC's original racks divide boxes into as small pieces as possible for transportation into condominiums and apartments. For a 210cm rack, the largest box with the support poles stored is 205cm x 30cm x 9cm, and for a 180cm rack, the largest box with the support poles stored is 175cm x 30cm x 9cm. It is not normal for a product to not fit into an elevator or pass through a door when delivered. The heaviest box weighs approximately 30kg.
[About specifying delivery date and time]
*For private homes For deliveries of large free weight equipment to private residences, it is not possible to specify a delivery date and time as the delivery company, Seino Transportation (Kangaroo Delivery), does not currently accept requests for specific delivery dates and times to private residences. Therefore, the item will be shipped without a specified date and time, but the delivery date and time can be adjusted to some extent by contacting the nearest Seino Transportation office after the item has been shipped and making arrangements. When delivering free weights to private homes, if the recipient is not at home and a second delivery is required, this places a heavy burden on the delivery staff. Therefore, if you are often not at home, we ask that you make arrangements to receive the item beforehand if possible.
・Meeting method After the product has been shipped, please contact the nearest Seino Transportation office by phone and provide the inquiry number and the date and time that you can receive the product. The delivery store can be confirmed using the confirmation URL that will be sent to you via email when the product is shipped.
We have also asked Seino Transportation to contact the recipient by phone before delivery, but the sooner the recipient contacts us the easier it will be to arrange the desired date and time.
After placing your order, if you specify a convenient delivery date, we will ship the product a few days before that date so that it can be delivered at the specified date and time.
*For stores and corporations You can only specify the date of delivery; you cannot specify the desired delivery time.
*Seino Transportation Office stop When placing an order, please enter the address and name of your nearest Seino Transportation office in the designated field on the delivery address input page. The storage period at the branch office is 10 days from the date of arrival.
[About warranty] MBC original rack equipment is sold with a 5-year warranty against manufacturing defects and a 30-day money back guarantee. You may return any product for any reason within 30 days of delivery, even if it has been opened or used. We also stock spare parts so that if any defective products are found, we can quickly replace them on a part-by-part basis. *Please contact us in advance by email or phone when returning an item. *When returning a product, please be sure to repackage it in the original packaging it was delivered in. *The outer packaging will be required for returns or exchanges, so please keep it for 30 days after the product arrives. If the outer packaging has been discarded, returns will not be possible. In addition, when returning a defective product for exchange, you will need to pack it yourself. Under no circumstances will we be able to send you outer packaging or packaging materials for repackaging. *If you return the product for your own reasons, you will be responsible for the original shipping fee, return shipping fee, refund fee, and payment fee. *For products other than MBC original racks (even if purchased together with MBC original racks), we cannot accept returns or exchanges after opening unless there is an unavoidable reason such as a defective product.
Assembly Method
Tools required for assembly
- 1 pair of 30mm wrenches or spanners
- 1 pair of 19mm wrenches or spanners
- 1 pair of 17mm wrenches or spanners
- 1 x 5mm hex wrench
・Stepladder (or large footstool) 1 unit
The product comes with an assembly manual, but please be sure to check the assembly instructions page at the link below before assembling the product.
Compatible racks and additional parts required for installation
-MBC Half Rack Standard 210cm Type 1, please purchase the optional 110cm top cross member (or logo plate cross member).
-MBC Half Rack Standard 210cm Type 1.5, Type 2, please purchase the optional 110cm bottom cross member.
-MBC Power Rack Standard 210cm Type 1, Type 2, please purchase the optional 110cm bottom cross member.
For MBC Power Rack Standard 210cm Type 3, move the 110cm bottom cross member that comes standard with the rack to the bottom of the posts.
・For the MBC Power Rack Standard 210cm Type 4, please purchase the optional 110cm bottom cross member. It can be attached to either the rear or center posts of the rack.
*Please refer to the following for installation methods for each rack. If you have any questions or concerns about installation, please feel free to contact us using the inquiry form.
FAQ
Handles for lat pulldowns are not included, please purchase handles separately according to your intended use.
When installing the Lat Pulldown/Low Row attachment on the racks listed below, an additional 20cm of space is required from the end of the rack. MBC Half Rack Standard 210cm Type 1 MBC Half Rack Standard 210cm Type 1.5 MBC Half Rack Standard 210cm Type 2 MBC Power Rack Standard 210cm Type 1 (Post spacing 62.5cm Depth 135cm) MBC Power Rack Standard 210cm Type 2 (Post spacing 77.5cm Depth 148cm) MBC Power Rack Standard 210cm Type 4 (Pole spacing 62.5cm Depth 178cm) *When installed on the rear pole
The total height of the lat pull attachment is 220 cm, but since assembly is difficult if there is not a gap of about 10 cm between the attachment and the ceiling, the ceiling of the installation location must be at least 230 cm high.
For Power Rack Types 1, 2, and 3, installing a lat pull attachment will cause the bottom cross member to interfere, making it difficult to bench press inside. To perform bench presses, you need to use the outside of the power rack as shown in the image below. (By connecting the lat pull attachment, which weighs approximately 190 kg in total, to the back side, the rack becomes more stable and you can use the outside of the rack.)
It can be installed after converting it into a power rack or half rack using MBC original rack conversion parts. At this time, it is not possible to attach it in the form of a squat stand.
The lat pulldown/low row attachment will be packed separately into 9 boxes and delivered by Seino Transportation. Please refer to the table below for box size and weight. (The number, size and weight of packages may change without notice.) Delivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building. For condominiums and apartment buildings, delivery will generally be made at the first floor entrance. In addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office.
There are some racks that can be installed at the same time and some that cannot. A rack that can simultaneously accommodate a lat pulldown/low row attachment and a multi-grip cross member MBC Half Rack Standard 210cm Type 2 MBC Power Rack Standard 210cm Type 1 (Post spacing 62.5cm Depth 135cm) MBC Power Rack Standard 210cm Type 2 (Post spacing 77.5cm Depth 148cm) MBC Power Rack Standard 210cm Type 3 (Pole spacing 77.5cm Depth 178cm) MBC Power Rack Standard 210cm Type 4 (62.5cm between posts, 178cm depth)
Please try the following methods.
1) Please make sure the floor is completely flat. If the floor is inclined, move it to a flat surface or adjust the flooring to make the floor flat. 2) Try loosening both small bolts on the guide rod top nuts. Overtightening these bolts can cause the shaft to contact the weight. 3) Check if the shaft is properly assembled to the top weight stack. There is a locking pin inside the hole of the top weight stack. Normally, the shaft is firmly assembled and fixed in the top weight stack.
If the above does not resolve your issue, please contact us by email.
If the pin at the bottom of the weight stack gets caught, the floor where you are installing it may be slightly tilted. Even a slight tilt of the floor can cause the bottom of the rod to shift by several millimeters from side to side, which can cause the pin to get caught. (Look at the bottom of the weight stack. If the tip of the rod is not in the center of the hole but is far to the right or left, it is likely that the inclination of the floor is the cause.) As a solution to this problem, we recommend inserting something like a thin rubber washer into the rubber ring at the bottom of the guide rod to correct the slight tilt.
The top weight stack is secured to the shaft by a locking pin. This is not an abnormality.
Although it depends on the size of the adjustable bench and the height of the user, when the lat pull attachment is attached to the MBC Half Rack Standard 210cm Type 1 and Type 1.5, the backrest angle on the larger MBC Adjustable Bench can only be set to about 15° to 30°. (In the case of the MBC Adjustable Bench Compact, it can be set to about 30° to 37.5°.)
Tab End
【Features】
Space-saving weight stack type, comes with 125kg of weights (in 5kg increments).
The pulleys are made of aluminum, which is durable and quiet, and feature quiet and smooth movement.
The leg roller can be precisely adjusted in position, angle, and length.
The footplate has treads to prevent slipping, and the mounting position can be adjusted with bolts.
The lat pull handle is installed in a two-roller structure with a spin function that allows you to pull in any direction, so you can pull the cable smoothly forward or sideways.
