A Smith machine attachment that can be installed on MBC's original rack with a total height of 210 cm. By adding it to the rack, you can perform exercises such as Smith machine squats, Bulgarian squats, lunges, military presses, back presses, bench presses, and incline bench presses. This product is designed with commercial-level strength, and by combining a 30mm diameter sliding rod with two pairs of large linear bushings, it achieves high rigidity and smooth movement. The bar has a diameter of 30mm, an initial weight of 22.5kg and has the Naar mark engraved at 40.5cm and 45.5cm from the centre.
specification
*Detailed specifications may be changed without notice.
Product weight : Approx. 120kg
Size : Height 203cm, Width 190cm
Initial weight of bar : approx. 22.5kg
Bar range : 52.5cm to 164cm from floor
Plate mounting part : diameter 50mm, total length 30cm
Frame color : Black (powder coating), Silver (hard chrome plating)
Country of Origin : China
Shipping
Free shipping: **Hokkaido and Okinawa; 9,900 yen
This product will be delivered by Seino Transportation. Delivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building. Deliveries to condominiums, buildings, and apartment buildings will generally be made at the first floor entrance. In addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office. If you purchase other products at the same time, they may be delivered separately from this product by Yamato Transport, Japan Post, Sagawa Express, etc.
[Shipping size and packaging weight] MBC's original racks divide boxes into as small pieces as possible for transportation into condominiums and apartments. For a 210cm rack, the largest box with the support poles stored is 205cm x 30cm x 9cm, and for a 180cm rack, the largest box with the support poles stored is 175cm x 30cm x 9cm. It is not normal for a product to not fit into an elevator or pass through a door when delivered. The heaviest box weighs approximately 30kg.
[About specifying delivery date and time]
*For private homes For deliveries of large free weight equipment to private residences, it is not possible to specify a delivery date and time as the delivery company, Seino Transportation (Kangaroo Delivery), does not currently accept requests for specific delivery dates and times to private residences. Therefore, the item will be shipped without a specified date and time, but the delivery date and time can be adjusted to some extent by contacting the nearest Seino Transportation office after the item has been shipped and making arrangements. When delivering free weights to private homes, if the recipient is not at home and a second delivery is required, this places a heavy burden on the delivery staff. Therefore, if you are often not at home, we ask that you make arrangements to receive the item beforehand if possible.
・Meeting method After the product has been shipped, please contact the nearest Seino Transportation office by phone and provide the inquiry number and the date and time that you can receive the product. The delivery store can be confirmed using the confirmation URL that will be sent to you via email when the product is shipped.
We have also asked Seino Transportation to contact the recipient by phone before delivery, but the sooner the recipient contacts us the easier it will be to arrange the desired date and time.
After placing your order, if you specify a convenient delivery date, we will ship the product a few days before that date so that it can be delivered at the specified date and time.
*For stores and corporations You can only specify the date of delivery; you cannot specify the desired delivery time.
*Seino Transportation Office stop When placing an order, please enter the address and name of your nearest Seino Transportation office in the designated field on the delivery address input page. The storage period at the branch office is 10 days from the date of arrival.
[About warranty] MBC original rack equipment is sold with a 5-year warranty against manufacturing defects and a 30-day money back guarantee. You may return any product for any reason within 30 days of delivery, even if it has been opened or used. We also stock spare parts so that if any defective products are found, we can quickly replace them on a part-by-part basis. *Please contact us in advance by email or phone when returning an item. *When returning a product, please be sure to repackage it in the original packaging it was delivered in. *The outer packaging will be required for returns or exchanges, so please keep it for 30 days after the product arrives. If the outer packaging has been discarded, returns will not be accepted. In addition, when returning a defective product for exchange, you will need to pack it yourself. Under no circumstances will we be able to send you outer packaging or packaging materials for repackaging. *If you return the product for your own reasons, you will be responsible for the original shipping fee, return shipping fee, refund fee, and payment fee. *For products other than MBC original racks (even if purchased together with MBC original racks), we cannot accept returns or exchanges after opening unless there is an unavoidable reason such as a defective product.
Assembly Method
Tools required for assembly - 1 pair of 30mm wrenches or spanners ・19mm wrench or spanner - 10mm hex wrench ・Stepladder (or large footstool) 1 unit
The product comes with an assembly manual, but please be sure to check the assembly instructions page at the link below before assembling the product.
Compatible racks and additional parts required for installation
To install this product, you will need 7 accessory holes on the top and 4 accessory holes on the bottom.
A rack that can be installed behind the pole using a short trawler. ・MBC Squat Stand Standard 210cm (※Only compatible with 148cm base size, cannot be installed on 135cm base size) ・MBC Squat Stand Standard 210cm Adjustable Bench Compatible (*Can be installed on both 135cm and 148cm base sizes) ・MBC Squat Stand Smith Integrated 210cm
Racks that can be installed inside the rack : MBC Power Rack Standard 210cm Type 1 (62.5cm between posts, 135cm deep) ・MBC Power Rack Standard 210cm Type 2 (post spacing 77.5cm depth 148cm) ・MBC Power Rack Standard 210cm Type 4 (Post spacing 62.5cm Depth 178cm)
Rack that can be installed both inside and outside the rack
(A short trawler is required to install on the outside of the rack.)
・MBC Half Rack Standard 210cm Type 1 ・MBC Half Rack Standard 210cm Type 1.5 ・MBC Half Rack Standard 210cm Type 2 ・MBC Power Rack Standard 210cm Type 3 (post spacing 77.5cm depth 178cm)
FAQ
There will be interference with the "MBC Half Rack Standard 210cm Type 1" and "MBC Half Rack Standard 210cm Type 1.5". The "MBC Half Rack Standard 210cm Type 2" can be used without interference.
There is no built-in counterweight, and the initial weight of the bar is approximately 22.5 kg.
The Smiths attachment can also be installed on the lower unattached rack. However, the lower unconnected rack may have its supports tilted slightly inward or outward due to subtle distortion of the metal caused by heat during welding. This slight tilt, which is not a problem in normal use, may interfere with the smooth operation of the Smith attachment. This is not a safety issue, and in the case of particularly high precision components that do not have the slightest distortion caused by the heat of welding, it may not be an issue at all. If such a problem does occur, it can be dealt with to some extent by inserting a spacer into the upper connecting part and fine-tuning the angle of the support pillar to be vertical.
Tab End
[Optional settings]
Please select the option of whether or not to include a short troller (pair). Selecting the option "Add Short Trawlers (Pair) *Bolts not included" will add only the Short Trawlers (Pair). The "Add Short Trawlers (Pair) *Includes Installation Bolt Set" includes the Short Trawlers (Pair) as well as an M20mm x 120mm bolt assembly (set of 4) for installation. To install on the racks listed below, the optional "Short Trawler (Pair)" is required. ・MBC Squat Stand Standard 210cm (base size 148cm) ・MBC Squat Stand Standard 210cm Adjustable Bench Compatible Model
When installing on the racks listed below, the optional "Short Trawlers (Pair)" is required only if you are installing on the outside of the rack. ・MBC Half Rack Standard 210cm Type 1 ・MBC Half Rack Standard 210cm Type 1.5 ・MBC Half Rack Standard 210cm Type 2 ・MBC Power Rack Standard 210cm Type 3 (post spacing 77.5cm depth 178cm)
If the Smith attachment is installed inside the rack, the Short Trawler (pair) is not necessary.
*If you have any questions or concerns about compatibility with each rack or installation method, please feel free to contact us using the inquiry form.
